Product of Canada

We only get a very small number of these per year. Select faces are extremely rare and have no defects. They lie flatter. Badger are not an endangered species.A U.S. Fish & Wildlife export permit is needed for all shipments outside the United States.Not for sale in Indiana.

We offer tanned hair-on moose quarters. These are commercially tanned sections of moose hide with the hair. They are ideal for craft projects or fly-tying. One moose quarter measured 40" by 32".Moose are not endangered.A USFWS export permit is required for all shipments outside the USA.

The fisher tails measure approximately 12-16" long.A USFWS export permit is required for all shipments outside the USA.

The female skins are approximately 31" from the tip of the nose to the tip of the tail in overall length. Useable length is 21" long from the ears to the base of the tail and 2.5" wide at the top and about 4" wide at the bottom. The tail is about 7" long. The skins come cased (like a sausage). When cut open, they are about twice as wide. All skins are natural colors. Mink are not an endangered species. A USFWS export permit is required for all shipments outside the USA. ...

We usually have some arctic fox on hand. We only stock what we call a good, trading post quality fox. These have a good head, good body, and good tail but may be missing the front and/or back legs. They may or may not be cased skins. One Arctic fox skin we measured was approximately 29" (73.5 cm) from the tip of the nose to the base of the tail. Our Gxx codes denote individual pieces. If you would like to order a specific arctic fox skin, please go to our Gallery to pick the exact one shown....

The mink tails generally measure between 5" and 8".We can make the tails into keychains for a small fee. Add a silver or gold keychain from below to the shopping cart. Mink are not endangered.A USFWS export permit is required for all shipments outside the USA.

The tanned moose hocks are leg shin pieces that are suitable for craft projects. Its hair can be used for fly tying. The pieces are somewhat stiff. Hooves are not attached. Each piece is 13" to 17" long and 3.5" to 5" wide down the middle. Each piece weighs approximately 0.42 lbs.Moose are not an endangered species and are not subject to CITES controls. A U.S. Fish & Wildlife export permit is needed for all shipments outside of the United States.

This is topgrain #1/#2 grade deerskin leather. These are whole hides with some holes, blemishes, and scratches on the leather. Most of these imperfections are near the side of the skin. They come in different sizes and shapes. Each piece is different.Deer are not endangered.A USFWS export permit is required for all shipments outside the U.S.

The soapstone blocks are ideal for making pipe bowls and other small carving projects. Technically, this is Canadian talc from Quebec, commonly referred to as "soapstone" and used in most Iroquois carving crafts. Other sizes of rough or cut stone are available on a custom-order basis

We work with a tannery in Canada that tans salmon skins. We only sell full skins. The skins measure 19 - 23" (48 - 58 cm) long and 3 - 5" (8 - 12 cm) wide. These skins are "with scale". There is no tail or head. Salmon are not an endangered species. The skins are a by-product of the fishing industry. The salmon have not been killed just for the skin.

The moose hide leather is sold by the hide. We do not cut hides to specific dimensions. In general, this leather is thicker and more gold in color than the brain-tanned smoked moosehide leather. If you are making your own moccasins, you will need at least five square feet of leather. Please let us know if you need a smaller or larger hide and we will try to find the closest size for you. They are on average 11.25 to 22.25 square feet. We recommend using needles that are specifically used for...

The moose hide leather is sold by the hide. We do not cut hides to specific dimensions. We have a limited number of smaller #1 hides. These are ideal for making moccasins and leather bags. One random dark chocolate side hide was 14 square feet, and measured 59" by 27.25", weighing 3.32 lbs. They are on average 14 to 24 square feet. We recommend using needles that are specifically used for leather, such as our Glovers' Needles. ...

This is topgrain #1/#2 grade white deerskin leather hide. It is ideal for making vests, gloves, jackets, and crafts. The hide may have some holes, blemishes, and scratches on the leather so please look at the photos to see what you are getting. The white deerskin leather is very nice white in color. The weight is 2 to 2.5 ounce. The grade is a bit lower than garment grade but a lot higher than craft grade. Please note: whiteness of the leather may be different depending on the resolution and...

We offer a selection of tanned fox faces. Do not expect absolutely flawless faces, but don't expect junk either. These are designed for sale to kids in museum gift shops, at trading posts, for craft projects, and to fly tiers. If you are looking for flawless faces for craft projects, these may not be for you. These faces come from natural color foxes, i.e., they are not dyed.The select grade is the best quality available, with good eyes, ears, and noses. Red foxes not an endangered species and...

If you are looking for a wonderfully comfortable rug to put your feet on while working at your desk, try a sheared beaver skin. Sheared beaver has a truly decadent feel to it. All of the long guard hairs have been removed and only the dense underfur remains. These fashion-quality sheared beaver rugs are extra large beaver skins, also called "blanket" beaver because of their size. Each skin is slightly different in shape and dimensions. Some are more oval while others are rounder. They average...

These project pieces are cut from the body of a moose hide. These pieces are perfect for craft projects and tufting, even fly tying! We can also cut project pieces to order. If we do not have enough of a certain size in stock, please contact us by phone or email and we will let you know if we can cut more for you.A USFWS export permit is required for all shipments outside the USA.

We work with a tannery in Canada that tans salmon skins. We only sell full skins. The skins measure 19 - 23" (48 - 58 cm) long and 3 - 5" (8 - 12 cm) wide. These skins are "with scale". There is no tail or head. Salmon are not an endangered species. The skins are a by-product of the fishing industry. The salmon have not been killed just for the skin.

Horse leather is very strong material compared to other leather because it has very dense fibers. They are good for re-palming hockey gloves and crafts. We currently have these in prairie gold, cream and pearl. The Tannery Run have very few holes or cuts, and some marks on the grain side. The hides have an average size of 10 to 14 sq. ft.Horses are not an endangered species. The horses have not been killed just for the hide.There are no USFWS export restrictions on this product. ...

These are broken or cracked beaver teeth. Please note that we store the teeth in mineral oil to reduce the chance of cracking. All teeth may crack with the passage of time, especially if stored or used in a dry climate. To reduce the chance of further cracking, apply a light coating of mineral oil to the tooth as needed. We cannot ensure that a tooth will not crack with time.

We offer "Trading Post Quality" blue fox skins, which have a decent head, body, and tail. The skins come cased. One trading post blue fox skin we had in stock measured 38" (96.5 cm) from the tip of the nose to the base of the tail. Without the head or tail, these skins measure between 23" to 27" long.Blue fox are not endangered. U.S. Fish & Wildlife export permit is required for all shipments outside of the U.S.

This is a prairie 2.5 to 3 oz. gold reverse deer leather piece.  Reverse leather is bad grain (lots of damage, stains, on the hide side, etc.), with a good suede side. This is caused by poor salting/preservation of the hide or letting it sit too long before tanning. A U.S. Fish & Wildlife export permit is required for all shipments outside the U.S.

This is a cleaned and bleached Belgium draft horse skull from a family-run farm in Quebec, Canada that was prepared by a professional taxidermist. The skull is in very good condition. Horses are not an endangered species and are not subject to U.S. Fish and Wildlife controls or CITES.

The white deerskin leather is the same leather that was used in the wedding dress in Dances with Wolves. The leather is white all the way through. It is only made at one time per year. The leather must be specially treated when being tanned in order to get the crisp, white coloring in this grade. This is TOPGRAIN deerskin leather--often called Buckskin as well. It has a smooth side (skin side) and a rough side (suede side). Please note that this leather is made from Red Deer.We sell deerskin...

We only get a very small number of these per year. The #1/#2 badger faces are decent quality faces with few or minor imperfections. Badger are not an endangered species.A U.S. Fish & Wildlife export permit is needed for all shipments outside the United States.Not for sale in Indiana.